Your browser is out-of-date and not supported

Metalpol Furmaniak s.j.

Product catalog
Contact
Metalpol Furmaniak s.j.
ul. Rakoniewicka 38
62-068 Rostarzewo
Polska
tel. 61 444 25 03, fax 61 444 20 50
biuro@metalpol.com.pl
www.metalpol.com.pl
Contact persons
Konrad Szymanuszka, , k.szymanuszka@metalpol.com.pl, tel. +48614437995

Most downloaded
Recommended
Last added

Photos


Exterior doors, steel panel
General Information, door profile steel, are designed for use in private buildings, industrial and public buildings. Doors general use is one or double hinged doors, rebate. They consist of full leaf or partially glazed and a steel frame with a threshold or not.

For details, doors, steel profile, single or double. Wing door, single or double, full or glass is made from cold rolled steel profiles with wall thickness of 2 mm galvanized and powder coated. Wing passive in the double doors is blocked by lock edge. Door frames are made of steel, profiled galvanized sheet with a thickness of 2.0 mm and powder coated. Racks frames are welded. Door wings are suspended in the frame for a minimum of two hinges. No perimeter of the frame and sash is set gasket rebate.
Metalpol Furmaniak s.j. - Metalpol Furmaniak s.j. - New photo
Metalpol Furmaniak s.j. - Metalpol Furmaniak s.j. - Section through the frames
Metalpol Furmaniak s.j. - Metalpol Furmaniak s.j. - Types of door panels
Exterior doors, steel profile, filled with blind
General, Doors Steel Profile for transformer stations are designed for use in buildings and areas that require constant air exchange. Steel doors profile is a single or double hinged doors, rebate. They consist of wings fully, partially equipped with louvers for ventilation, or entirely filled with blind for ventilation and a steel frame with a threshold or not.

For details, doors, steel profile, single or double. Wing door, single or double, full or glass is made from cold rolled steel profiles with wall thickness of 2 mm galvanized and powder coated. Wing passive in the double doors is blocked by lock edge. Door frames are made of steel, profiled galvanized sheet with a thickness of 2.0 mm and powder coated. Racks frames are welded. Door wings are suspended in the frame for a minimum of two hinges. No perimeter of the frame and sash is set gasket rebate.
Metalpol Furmaniak s.j. - Metalpol Furmaniak s.j. - New photo
Metalpol Furmaniak s.j. - Metalpol Furmaniak s.j. - Section through the frames
Pressed steel door - other than all
Metalpol - Polish manufacturer of steel doors introduced a new surface finish of its products: stamping. However, unlike in the market of steel doors of various manufacturers as only does the individual - any patterns pressings depending on customers' needs.

Modern technology shaping sheet allows you to create individual projects in difficult processing material with high precision. Bilaterally applied galvanized sheet thickness of 1.5 mm makes the product is not only durable, but also visually attractive, and may be unique.

Steel doors stamped are designed for customers requiring both high quality as well as excellent thermal insulation and aesthetic performance.
Metalpol Furmaniak s.j. - Metalpol Furmaniak s.j. - New photo
Metalpol Furmaniak s.j. - Metalpol Furmaniak s.j. - New photo
Metalpol Furmaniak s.j. - Metalpol Furmaniak s.j. - New photo
Metalpol Furmaniak s.j. - Metalpol Furmaniak s.j. - New photo
Metalpol Furmaniak s.j. - Metalpol Furmaniak s.j. - New photo
Metalpol Furmaniak s.j. - Metalpol Furmaniak s.j. - New photo
Metalpol Furmaniak s.j. - Metalpol Furmaniak s.j. - New photo
Metalpol Furmaniak s.j. - Metalpol Furmaniak s.j. - New photo
Metalpol Furmaniak s.j. - Metalpol Furmaniak s.j. - New photo
Metalpol Furmaniak s.j. - Metalpol Furmaniak s.j. - New photo
Sliding doors Steel
General, steel sliding doors can be used as internal or, in some cases as external separation in industrial buildings. They can be made as a single, double, sliding or sliding. They consist of full leaf or partially glazed and a steel frame with a threshold or not.

For details, doors single or double. Wing door, single or double system is made of steel profiles, filling constitute galvanized steel, powder coated in any color. As the warming of the foam of polyurethane. Door frames are made of steel with a galvanized steel sheet with a thickness of 2.0 mm and powder coated. Racks frames are welded. Door wings are suspended in a rail at least two adjustable rollers one. Limiters prevent sliding wings with the guide rail.
Metalpol Furmaniak s.j. - Metalpol Furmaniak s.j. - New photo
Metalpol Furmaniak s.j. - Metalpol Furmaniak s.j. - Section through the frames
Steel doors Sheath
General, Steel doors general purpose, are intended for use in private buildings, industrial and public buildings. Doors general use is one or double hinged doors, rebate. They consist of full leaf or partially glazed and with a steel frame, with or without a threshold

For details, Doors general purpose, single or double. Wing door, single or double, full or glass is made of two steel sheets 1.5 mm thick galvanized and powder coated. Wing passive in the double doors is blocked by lock edge. Door frames are made of steel, profiled galvanized sheet with a thickness of 2.0 mm and powder coated. Racks frames are welded. Door wings are suspended in the frame for a minimum of two hinges. No perimeter of the frame and sash is set gasket rebate
Metalpol Furmaniak s.j. - Metalpol Furmaniak s.j. - Cross-section through the frames
Metalpol Furmaniak s.j. - Metalpol Furmaniak s.j. - New photo
Swing doors, steel profile, filled with panel full / glass
General, Steel doors swing, are intended for use in industrial and commercial buildings. Doors general use is one or double doors rebated. They consist of full leaf or partially glazed and a steel frame with a threshold or not.

For details, Steel doors swing, single or double. Wing door, single or double, full or glass is made from cold rolled steel profiles with wall thickness of 2 mm galvanized and powder coated. Door frames are made of steel, galvanized with a thickness of 2.0 mm and powder coated. Racks frames are welded. Door wings are suspended in the frame by means of closer underfloor lockable in the open position at an opening angle of 90 °.
Metalpol Furmaniak s.j. - Metalpol Furmaniak s.j. - New photo
Metalpol Furmaniak s.j. - Metalpol Furmaniak s.j. - Section through the frames
The door to the installation shafts
General, Steel doors for installation shafts, are designed for use in private buildings, industrial and public buildings. The door to the shafts are single or double hinged doors, rebate. They consist of full leaf and a steel frame.

For details, doors to the shafts, single or double, full is made of a steel sheet thickness of 1 mm, galvanized and powder coated. Wing passive in the double doors is blocked by lock edge. Door frames are made of angle iron 40x40x4mm. Racks frames are welded. Door wings are suspended in the frame for a minimum of two hinges.
Metalpol Furmaniak s.j. - Metalpol Furmaniak s.j. - New photo
Metalpol Furmaniak s.j. - Metalpol Furmaniak s.j. - Section through the frames (levels)
Metalpol Furmaniak s.j. - Metalpol Furmaniak s.j. - Section through the frames (vertical)
The standard steel doors ECO
Metalpol Furmaniak introduces the standard steel door ECO. Despite the economic name of the product is made of two sheets of 1.0 and 1.5 mm, with angular frame sheet 2 mm.

Steel doors ECO to exterior doors in standard dimensions 900/2000 mm. The high thermal insulation Ud = 1.3 W / m2K, obtained through the innovative separation of metal sheathing.

The inner filling consists of mineral wool with a high density. According to the adopted in METALPOL standard basic equipment is a mortise lock in accordance with PN-EN 12209 tested at 200 thousand. cycles.
Metalpol Furmaniak s.j. - Metalpol Furmaniak s.j. - New photo
Metalpol Furmaniak s.j. - Metalpol Furmaniak s.j. - New photo
Steel doors without a thermal profile
General Information, door profile steel, are designed for use in private buildings, industrial and public buildings. Steel doors profile is a standard single or double hinged doors, rebate. They consist of full leaf or partially glazed and a steel frame with a threshold or not.

For details, doors, steel profile, single or double. Wing door, single or double, full or glass is made from cold rolled steel profiles with wall thickness of 2 mm galvanized and powder coated. Wing passive in the double doors is blocked by lock edge. Door frames are made of steel, profiled galvanized sheet with a thickness of 2.0 mm and powder coated. Racks frames are welded. Door wings are suspended in the frame for a minimum of two hinges. No perimeter of the frame and sash is set gasket rebate.
Metalpol Furmaniak s.j. - Metalpol Furmaniak s.j. - New photo
Metalpol Furmaniak s.j. - Metalpol Furmaniak s.j. - Section through the frames

About company


METALPOL Furmaniak company specializes in the manufacture, sale and installation of external doors and steel doors. To meet customer expectations, we offer a wide range of products, while ensuring the best technological solutions and attractive price.

 

In our offer you will find products aimed at both consumers and entrepreneurs. Many years of experience allows us to constantly fine-tune and improve our product to meet not only the aesthetic expectations of users, but also the technological requirements and the strength of the product.

We offer a full range of external doors: general purpose steel, wood and steel, steel approved, in different classes of resistance to burglary and profile steel, produced in our own profile system. We also produce steel doors hinged, sliding and sliding. Each order implement, taking into account individual needs.

 

We are also a system supplier of steel profiles Furmaniak, for the production of steel doors.
We guarantee reliable quality at an attractive price!

Atypical steel door arches finished profile


For modernization and use changes in the region caponier battery and shoulder in the Warsaw Citadel on behalf of the Katyń Museum Metalpol he made and provided unusual steel door profile.

Steel door profile finished arches have additional ventilation louvers. Special execution and accessories stand out the door to the room of transformers, which also had to use a special lock function evacuate and grounding elements.

Viewing photo workshop, we will soon present the photos mounted products.

All components are painted with special paint powder IGP Pulvertechnik AG colored deep mat of fine structure, with high resistance to wear and weather-resistant.

Contents